Porter Brook Wheels and Sites of
Interest
Brook sections correspond with the 1850 maps.
Many of the monuments and sites of interest are
dated after 1850, and all sites will eventually have their own page.
Much of my information on these sites is sparse, so
please feel free to enlighten
me with further facts or send me links.
Contributions which are included will be
acknowledged.
Mayfield Brook
- Fulwood Mills (Corn) (Mayfield
Brook) 2 wheels
http://www.portervalley.fsnet.co.uk/Newsletters/Newslet4.DOC
To Bowser
Bottom
- Whiteley Wood Works – (Forging)
Forge Mills/Dam
- Bowser Bottom, Wire Mills/Dam ,
Whiteley Wood Dam
http://www.portervalley.fsnet.co.uk/Newsletters/Newslet9.DOC
To Porter
House
- Nether Mill, Leather Wheel, Holme
Wheel, Whiteley Woods Bottoms Wheel 1754
http://www.portervalley.fsnet.co.uk/Newsletters/Newslet11.doc
To
Ibbotson Wood
- Ibbotson Wheel, (Upper Spur Gear
Wheel) 1584
- Trippet Wood
- Ibbotson Wood
To Smith Wood
To Hunter’s Bar
http://public-art.shu.ac.uk/sheffield/tho188im.html
To Stalker Wheel
- Tom Wood
- George Woofindin Almshouses
- St. Augustine’s Church
- Nether Lescar Turning Wheel 1620
(site of)
- Porter Steel Works (site of)
- Heritage Museum
- Sharrow Mills (Snuff) 1700
- Cemetery Lodge
- Ecclesall Mineral Water Works (site
of)
- Eagle Foundry
- Stalker Wheel (site of)
- Stalker Walk
To Broomhall
To Ponds Lane
NORRIS, SAMUEL
Sheffield
1795 - 1815 ("Old Sheffield Razors" by Lummus. Antiques, December 1922
p.261-267) (Straight Razor Manufacturer) Samuel Norris Master Cutler 1777
-
- Vulcan Works (Forge and Rolling
Mills)
- Lead Mill Dam (Site of) The Lead Mill or White
Lead Works developed out of another grinding wheel, built by George
Marriott in 1732-3, which went out of use in the
- 1780s. The White Lead
Works had been erected in 1759 and continued in use until the later 19th
century, when the works closed, the dam was infilled and the site built
over. Redevelopment has recently given archaeologists the opportunity to
investigate this site. Below ground evidence for the dam and wheel pits,
associated with both the Marriott Wheel and White Lead Works were found to
survive, as well as later features relating to pigment production and lead
refining at the Lead Works
-
- Shrewsbury Hospital
- Suffolk Works Archaeological
investigation on the site of the former Suffolk Works, for example, which
lies just outside the CIQ, has revealed a 12-hole crucible furnace for
refining steel and numerous grinding troughs and workshops. The site,
which was occupied by Thomas Turner and Sons from 1834 until the 1950s,
produced numerous metal finds, allowing the manufacturing process of
particular cutlery items to be explored.
-
- Pond Mill – Corn, Cinderhill Wheel,
the New Pond Mill. Cinderhill Wheel is mentioned in rentals as early as
1581. In 1752 there was a change of use from grinding wheel to corn mill,
and the site was then known as ‘new Pond Mill’. Unlike other nearby
industrial properties, the mill was not sold by the Norfolk estate in the
19th century. However, in 1866 the buildings were demolished, the dam
filled and the site redeveloped.
-
To The Sheaf
- Dam (Site of), Sylvester Wheel. The
small grinding wheel, later known as Sylvester Wheel, is first mentioned
in early 17th century rentals. The Wheel was sold by the Norfolk estate in the early 19th century
and the site was subdivided and sold for redevelopment by 1864. The name
‘Sylvester’ comes from a 17th century tenant – the wheel was later also
known as Ellin’s Wheel, after a 19th century owner.
-
- Bamforth Dam (Site of)
- Harmer Lane Gardens (Site of)
- Sheaf Island (Site of)
- Ponds Dam (Site of)
- Ponds Forge (Site of)
- Sheaf Bridge
- The Corn Exchange (Site of)
Home